The LARX CARBON-FILM.COM heating system is characterized by a method of heat transfer by large-area radiation, the entire floor area, or whole-surface.
Whole-surface heating
Heating films have contact with the floating floor (or screed) in their entire area. As a result, temperature distribution and heat transfer are much more efficient than with heating cables or water heating systems. Our heating system LARX CARBON-FILM.COM heats really the full-area. The heat radiates evenly from the entire floor surface into the heated room. When using a water floor heating system or an electric heating cable, even with the best meander arrangement it is not possible to achieve such an even distribution of the tread temperature as when using heating films, where there are no cold/overheated places on the floor, heating is fast, regulation is dynamic and accurate and the room has a healthy climate.
Heating film Heating cable
Unlike linear systems (snake), the carbon foil will still work and heat without any problems even if it is accidentally damaged (eg drilled). If the heating cable is damaged, the heating system in the entire room may stop heating, this is not a risk with the heating film.
Choosing floating floor
An important role in the speed of regulation and dynamics of heating through the heating system LARX CARBON-FILM.COM of course also plays the right floor covering, it must be certified for underfloor heating – do not be afraid, most floor covering manufacturers have floors with this purpose in their portfolio. You can find more information about the composition of the floor with our heating system in this article.
If you are interested in our LARX CARBON-FILM.COM heating system, do not hesitate to contact us through our contact form.